Creatbot F430 Large 3D Printer
Creatbot F430 Large Desktop 3D Printer
The CreatBot F430 is a low cost high temperature 3D printer for additive manufacturing with PEEK filament and other high performance materials that require high extrusion temperatures.
- Up to 70°C heated installation space minimizes warping
- 3D print PEEK, nylon, PC and other high temperature filaments 420°C heatable hot end
- Power failure backup to easily resume your 3D prints continuously
- Automatic levelling and adjustment of the construction platform
- Heated installation space reduces warping
- Full metal hot end
- Hot end can be heated up to 420°C
- High manufacturing precision
- Complete metal housing
- Large installation space: 40 x 30 x 30 cm
- Filament sensor for status detection
- Glass ceramic printing bed for wonderfully smooth undersides
- Simple and intuitive operation via touch screen
- Direct drive of the extruder
- Completely enclosed installation space
- Air filter system for clean ambient air
Support 420°C Hotend
We are the first one to publish 420°C high temperature nozzle to 3d printer market since year of 2016, now it is the 4th new tech version. F430 equiped with dual extruders, The left 260°C hotend is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right 420°C hotend is made of martensite steel, which is able to print High performance material like PEEK, ULTEM, etc. The dual hotend is replaceable, which provide more possibility on your application.
High Precision & High Speed
We exclusively research and develop the extruder feeding system and guide rail, which support high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block.
The whole-steel body not only ensure the stability when printing, but also extend the usage period greatly. Its optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 5 years and more than 8000 hours.
Fully Enclosed High-Temperature Chamber
Fully enclosed chamber can block all external interference and reduce noise. Hot chamber can provide constant room temperature so that model wont deform when printing.
Outage Restored & Filament Detection
The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after powers on.The printer will avoid invalid printing by stoping print and warning when filament runs out.
The printer have all-English-menu touch screen which is easy operate and friendly use. One key to warm,one key to print as well as many other shortcut keys.
GLASS CERAMIC PLATFORM
The printer has mico-crystal platform so that can support hight thermal efficiency, you can set the parameters to turn off the hot bed automatically after the specified number of layers.
Air Filter System
The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.
Automatic Leveling Platform
Use of 25 points through the probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.
FILAMENT & APPLICATION
standard f430 are able to print PLA,ABS,Nylon,etc perfectly. The f430-PEEK version applied to 3D printing of PEEK. We supply high quality PEEK filament as well , which requires 420°C extrusion temperature. The material have features of high strength, high toughness, corrosion resistance and wear resistance. It can be used in aerospace, electronics, medical, machinery, automotive and other industries.
Fused Deposition Modeling
Number of Nozzles:
PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA, PEEK, etc.
0.4mm (0.3, 0.5, 0.6, 0.8, 1.0mm)
Print File Type:
Ambient Operating Temperature:
Max. Nozzle Temperature:
Max. Bed Temperature:
Max. Chamber Temperature:
Best Printing speed:
Max. Printing speed:
Max. traveling speed:
Power-Coated Steel, Aluminum Casting for Motion Components, POM
Glass Ceramic Panel
Build Plate Leveling:
1.8° Step Angle with 1/16 Micro-stepping
X Y Positioning Precision:
Z Positioning Precision:
4.3″ Touch Screen
Supported File Types:
STL, OBJ, AMF
Mac OS X
Save data when power is off
Pause printing when filament run out
Turn off the power automatically when printing is complete
SIZE & WEIGHT
Product Dimensions & Weight:
Packing Size & Weight:
About Estimated Lead/Shipping Time
|Warehouse||Estimated Shipping Time|
|China Warehouse:||7 to 11 days|
About Prices and Import Taxes
Our prices do not include Import Duty/Tariff and GST/VAT applicable in your country. This item ships from China where you may be subject to pay import taxes and additional shipping charges. Please contact your local customs office to know about your import taxes tariffs. If your import taxes are high, please contact us. We will help you.